BGCWF - LONCO MIL-A-35-DA ROSIN FLUX
- MSDS: BGCWF
- Manufacturer: LONDON CHEMICAL CO INC
- Product Name: LONCO MIL-A-35-DA ROSIN FLUX
- National Stock Number: 3439-01-007-5494
Product Identification
Product ID:LONCO MIL-A-35-DA ROSIN FLUX
MSDS Date:01/01/1985
FSC:3439
NIIN:01-007-5494
MSDS Number: BGCWF
Responsible Party
BENSENVILLE, IL 60106-1632
US
Cage: 11829
Contractor
Telephone: 304-744-3487
Cage: 11829
Ingredients
NOT MORE THAN 36%
NOT MORE THAN 20%
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NOT MORE THAN 31%
Hazards
Effects of Overexposure:DIZZ,NAUSEA,HEADACHE(NARCOSIS).EYE IRRIT &
BURNING.
First Aid
First Aid:SKIN:WASH OFF W/RUBBING ALCOHOL,FOLLOWED BY A GOOD
SOAPING.APPLY HAND/BORATED CREAM.EYE:IMMEDIATELY FLUSH W/WATER AT
LEAST 15 MIN.CALL MD.INHALATN:REMOVE TO FRESH AIR.CALL
MD.INGESTION:CALL MD.PRODUCT DOES NOT CONTAIN METHANOL OR
CHLORINATED SOLVENTS
Fire Fighting
Flash Point:87F SCC
Lower Limits:0.8
Upper Limits:10.5
Extinguishing Media:CO*2 OR TRI-CLASS DRY CHEMICAL.FINE H20 SPRAY
CONFINES FIRE
Accidental Release
Spill Release Procedures:TREAT AS RESIN SOLUTION IN ORGANIC SOLVENT.USE
NONFLAMMABLE SOLVENT,FOLLOWED BY WASHING DOWN W/MILD DETERGENT
SOLUTION.USE ADEQUATE VENTILATION. ALTERNATE METHOD:SOAK UP W/OIL
DRY COMPOUND,FOLLOWED BY A MILD DETERGENT SOLUTION.
Handling
Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. KEEP FROM
OPEN FLAMES OR WELDING AREAS.
Exposure Controls
Respiratory Protection:IF NECESSARY,NIOSH/MSHA APPRVD RESPIRATORY
PROTECTION.
Ventilation:PROVIDE ADEQUATE VENTILATION
Protective Gloves:VINYL
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:VINLY APRON
Supplemental Safety and Health
MIL-F-14256,TYPE RMA. PH=5.10.SPECIFIC GRAVITY GIVEN @ 25C.FIRE
POINT:108F.AUTOIGNITN TEMP:650F.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:250 F
Vapor Density:2.75
Spec Gravity:0.877
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER, MILD ODOR
Stability
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:KEEP FROM FLAMES WELDING AREAS.
Hazardous Decomposition Products:C,CO & CO*2 AND NOXIOUS FUMES FROM THE
ROSIN ACIDS
Disposal
Waste Disposal Methods:DO NOT DISCHARGE INTO SEWERS .IF SOLVENT IS
EVAPORATED,A MILD ALKALINE SOLN CAN CONVERT RESIDUE MATERIAL TO A
ROSIN SOAP & THEN COULD BE DISCHARGED.WHETHER DISCHARGED.HAULED
AWAY BY DISPOSAL SERVICE,O R BURNED,IT SHOULD BE IAW LOCAL,STATE
&FEDERAL RE
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.